This section describes changing the Analog Line Groups for outbound dialing. The default group "0" contains all installed analog lines, if you will not be using all the installed ports you must remove the unused ports in order for outbound dialing to work properly.

1. Login to your Freevoice PBX admin page.
2. Mouse over PBX and click File Editor.
3. At the File Editor page scroll down and click zapata-auto.conf
4. Each fxo port is referred to by channel number, find the channel number ("Channel=>#")for the port and change the group setting on the line above the channel number. Set the group to '1' ("group=1") to remove it from the default group '0'.
5. Click the Update button in the bottom left corner when done.
6. Click Re-Read Configs to reload the PBX.()