|
Feature Codes:
The Freevoice PBX has many built in feature codes. These codes may be changed, this allows you to match these feature codes with the ones used on a previous system. Be sure the new feature code number does not conflict with any other feature codes or extension numbers. - Login to FreePBX as described here.
- Click the Setup tab at the top of the page.
- On the left side of the page click the Feature Codes link under Basic.
- Configure the Feature Codes following the guidelines below.
- Use Default: Uncheck this box to be able to change the Feature Code, if left checked the Feature Code will not be editable.
- Feature Status: Set this drop down box to Enabled or Disabled in order to enable or disable this Feature Code.
- Click the Submit Changes button when done.
- To apply the changes click the red "Apply Changes" Bar in the upper right corner of the page. You may add more inbound routes before clicking "Apply Changes", just be sure to click the "Apply Changes" bar before exiting.
FreePBX FreePBX is a web based administration tool for the Asterisk Open Source PBX. This is where you will program your extensions, trunks (lines), and IVR menus. As well as your inbound and outbound call routing. This interface is intended to be very straight forward and offers hints for almost every setting. Simply roll your mouse over the setting name, if there is a hint for the setting you will see a pop-up box with information regarding the setting. Mozilla Firefox is the suggested web browser for using Freepbx Internet Explorer is not currently supported due to it's lack of compliance with Internet standards. FreePBX also includes a basic Call Detail Reporting package, this application will show basic incoming and outgoing call information. The application will also allow for the call records to be searched and sorted, data may be exported as a CSV or PDF file. This package will not report call queue information or statistics. |
